Dishwasher repair in Lindale, Tyler, Van & East Texas

Signs it is time

• Water left in the bottom after a cycle
• Dishes coming out dirty or gritty
• Leaking onto the floor
• Will not start or stops mid-cycle

What we do

• Drain problems: Filters, pumps and hoses.
• Cleaning problems: Spray arms and inlet valves.
• Leaks: Door seals and connections.
• Install: New units leveled and secured.

Built for East Texas weather

Hard water leaves scale on spray arms and filters, which hurts cleaning. Regular filter cleaning helps a lot.

A dishwasher that leaves water in the bottom is usually fighting a clogged filter, a kinked drain hose or a tired drain pump. Dishes that come out gritty point to clogged spray arms or a filter that has not been cleaned in a while, which is common with East Texas well water. We check the simple causes before ordering parts, and if the unit is old and the repair is expensive, we will tell you a replacement makes more sense.

Options

• Repair: Fix it.
• Install: New dishwasher, hooked up and tested.

Questions

Can you install a dishwasher where there was not one?

Often, yes, though it may need plumbing or electrical that requires a licensed pro.

Why is there water in the bottom of my dishwasher?

Usually a clogged filter, a kinked drain hose or a failing drain pump. We check them in that order.

Can you remove my old dishwasher?

Yes. We remove and haul off the old unit when we install a new one.

Related work

Appliance Installation · Clogged Drains · Garbage Disposal Repair & Install · All appliance repair